QC INSPECTOR
cameron
Malaysia , Johor , Gelang Patah
1 hari yang lalu

Job Summary

QC Inspector shall perform dimensional and visual inspection on the raw, partially finished and finished products following the engineering drawings.

The inspector shall complete the inspection tasks per BOM and SAP based manufacturing routings.

  • Interpreting engineering drawings & GD&T requirements performs thorough dimensional
  • inspection and completes inspection checklist provided by the machine shop.
  • Raise NCRs when nonconforming conditions are detected.
  • Use dimensional measuring instruments like thread ring / plug gauges, ball gauges, micrometers, calipers, indicators, profile projectors, and Brinell hardness test equipment as well as CMM equipment.
  • Work in receiving inspection, in-process inspection and final inspection areas based on the assignments.
  • Update and revise SAP based NCRs based on Engineering disposition and follow specific NCR generation guidelines to create adequate nonconforming reports.
  • Perform calibration and maintaining computer based calibration program by generating periodic calibration recall reports to notify users of the gages to submit gages that are due for calibration.
  • Perform Hardness testing in calibrating the testers and do proper surface preparation based on the Cameron procedures and / or ASTM methods.
  • Travel to supplier locations to perform dimensional and visual inspection based on the requirements and assignments.
  • Perform inspection at optimum cycle time with required precision.
  • Perform scrap transactions in the SAP system.
  • Perform paint / coating thickness checks using paint thickness gages as well as able to perform NACE level I and II tests per requirements.
  • Inspect sub-assemblies of the components and final assemblies as final inspection following a pre-defined inspection checklist.
  • Communicate with third party inspectors required to review and / or witness inspector activities.
  • Minimum Job Qualifications

  • Vocational / Technical Certificate in Metal / Precision Engineering or equivalent.
  • Minimum 3 years’ experience in quality control performing dimensional inspection.
  • Competent in use of measuring instruments, unit conversion and interpreting engineering drawings.
  • Understand CMM programming and operation.
  • Able to handle heavy parts using overhead cranes and other lifting equipment safely.
  • Able to clearly communicate verbally and written.
  • Computer literate (Outlook, Words, Excel).
  • Willing to work in rotating shifts and flexible to rotate from one inspection area to the other per Supervisory assignments.
  • Memohon
    Tambah ke kegemaran
    Alih keluar dari kegemaran
    Memohon
    E-mel saya
    Dengan mengklik pada "Seterusnya", saya memberikan persetujuan neuvoo untuk memproses data saya dan menghantar saya amaran e-mel, seperti yang terperinci dalam # Privacy Policy neuvoo . Saya boleh menarik balik persetujuan saya atau berhenti berlangganan pada bila-bila masa.
    Seterusnya
    Borang permohonan